• MX191
    • Compare
  • RadiForce MX191
  • RadiForce MX191
  • expand
  • RadiForce MX191
RadiForce MX191
1MP 48cm (19") COLOR LCD MONITOR
Calibration compliant with the DICOM Part 14 standard. This high cost performance narrow bezel 19" monitor presents a space-efficient and high-volume installation solution to the space limited environment.
  • Contact EIZO
  •  
2 items
 
  • Features
  • Specifications
  • Documents
  • Graphics Boards
  • QC Software & Tools Accessories

DICOM Part 14 Compliant

To ensure the most accurate and consistent shadings possible, EIZO carefully measures and sets every grayscale tones on the production line to produce a monitor compliant with DICOM Part 14.

Brightness Stabilization

At startup or upon wakeup, the EIZO patented drift correction function quickly stabilizes the brightness level. In addition, a sensor measures the backlight brightness and compensates for brightness fluctuations caused by the ambient temperature and the passage of time.

Handy Partitioning for Widescreen Monitor and Multi-Monitor Environments

EIZO ScreenSlicer is a monitor software utility that allows an entire screen to be effectively used though partitioning. Multiple windows can be easily aligned and dropped into the partitioned areas in single- or multi-monitor environments for convenience.

Backlight Saver with Viewer Application

By setting the Backlight Saver function to operate with viewer application, the monitor's backlight is on while the viewer is being used and the backlight is off while the viewer is not being used.

Customer Assurance with Medical Standards

EIZO monitors meet the strictest medical, safety, and EMC emission standards.

Simplified Calibration to DICOM Part 14

With the bundled RadiCS LE quality control software, the monitor's backlight sensor performs simplified calibration compliant with the DICOM Part 14 standard to correct the brightness and grayscale tones of the monitor. This reduces the time spent administering to the monitor.

Mode Selection for Optimum Viewing

Selectable with the front panel buttons, the CAL Switch function allows for various calibration modes of different modalities such as CR, CT, and endoscope images. Furthermore, auto mode settings can be made with the Auto CAL Switch function.

Backlight Saver with Screen Saver

With ScreenManager Pro for Medical utility software installed, the Backlight Saver function turns off the monitor's backlight when the screen saver is activated, and turns it on again when the computer comes out of screen saver mode. This function helps to reduce power consumption when the monitor is used for a prolonged period of time.

Ergonomic Design for Improved Operability and Less Fatigue

The height, swivel, and tilt adjustable stand offers added flexibility and viewing comfort.

5 Year Warranty

EIZO and its authorized distributors offer a five-year limited warranty.

Brightness deterioration is not covered.

 

Cabinet Color Black
Panel  
Type Color TFT LCD Panel (VA)
Backlight CCFL
Size 48 cm / 19" (481 mm diagonal)
Native Resolution 1280 x 1024 (5:4 aspect ratio)
Viewable Image Size (H x V) 376.3 x 301.0 mm
Pixel Pitch 0.294 x 0.294 mm
Display Colors 8-bit colors: 16.77 million from a palette of 8.50 billion colors
Viewing Angles (H / V, typical) 178° / 178°
Brightness (typical) 300 cd/m2
Contrast Ratio (typical) 2000:1
Response Time (typical) 20 ms (On/Off), 8 ms (Midtone)
Video Signals  
Input Terminals DVI-D x 1, D-Sub mini 15 pin x 1
Digital Scanning Frequency (H / V) 31 - 64 kHz / 59 - 61 Hz
Analog Scanning Frequency (H / V) 24.8 - 80 kHz / 50 - 75 Hz
Sync Formats Separate
USB  
Function 1 upstream
Standard USB 2.0
Power  
Power Requirements AC 100 - 120 V, 200 - 240 V: 50 / 60 Hz
Maximum Power Consumption 43 W
Typical Power Consumption 26 W
Power Save Mode Less than 0.8 W
Power Management Digital: DVI DMPM, Analog: VESA DPM
Sensor Backlight Sensor
Features & Functions  
Brightness Stabilization Yes
Preset Modes CAL Switch
OSD Languages English, German, French, Italian, Japanese, Simplified
Chinese, Spanish, Swedish, Traditional Chinese
Physical Specifications  
Net Weight 7.2 kg
Net Weight (Without Stand) 5.2 kg
Hole Spacing (VESA Standard) 100 x 100 mm
Certifications & Standards (Please contact EIZO for the latest information.) CE (Medical Device Directive), EN60601-1, UL60601-1, CSA C22.2 No. 601-1, IEC60601-1, VCCI-B, FCC-B, Canadian ICES-003-B, C-tick, RoHS, China RoHS, WEEE, CCC, GOST-R
Supplied Accessories AC power cord, signal cable (DVI-D - DVI-D), USB cable, Utility Disk (RadiCS LE, ScreenManager Pro for Medical, user's manual)
Warranty Five Years
Dimension Drawing GIF

Brochures

NEW
RadiForce general
9.01 MB

Download

 

Manuals

Please note that you must be a registered user to download RadiForce relevant files. If you have not registered, please continue on to our registration page. If you have forgotten your User ID or Password, please send us an e-mail.

Languages

 

Document Language Size Download
RadiForce MX191 Instructions for Use_UsersManual (English) English 1.49 MB Download
MX191 Instructions for Use_SetupManual English
Chinese-Simplified
French
German
3.01 MB Download
ScreenSlicer Ver.1.1.5 Software manual (English) English 1.88 MB Download
RadiForce MX191 Instructions for Use_UsersManual (Chinese-Simplified) Chinese-Simplified 1.6 MB Download
RadiForce MX191 Instructions for Use_UsersManual (French) French 1.51 MB Download
RadiForce MX191 Instructions for Use_UsersManual (German) German 1.5 MB Download
RadiForce MX191 Instructions for Use_UsersManual (Russian) Russian 1.58 MB Download
Graphics Boards
MED-X7000

- EIZO original driver and bios
- PCI-Express x16

Graphics Boards
MED-X5000

- EIZO original driver and bios
- PCI-Express x16

Graphics Boards
MED-X4900

- EIZO original driver and bios
- PCI-Express x16

Graphics Boards
MED-X3900

- EIZO original driver and bios
- PCI-Express x16

Recommended
Graphics Boards
Xenia Pro

- PCI-Express x16

Graphics Boards
Xenia

- PCI-Express x16

Recommended
QC Software & Tools
RadiCS

- Quality Control Software

QC Software & Tools
UX1 Sensor

- Quality Control Tool
- External Sensor

QC Software & Tools
Clip-On Swing Sensor G2

- Quality Control Tool
- Attachable Sensor

Panel Protector
FP-702

- Protect against dust and scratches
- Fit between screen and bezel

Arms
LA-030-W

Position the monitor almost anywhere with forward/backward and side-to-side movement

Arms
LA-011-W

35° up tilt and 180° swivel wide adjustment range

Stand
LS-HM1-D

Supports two LCD monitors.
Height adjustable in six increments

Monitor Cleaning Kit
ScreenCleaner
ScreenCleaner

- Keep your screen free from dust and fingerprints
- Includes pump spray and cloth